CCNP Training (Cisco Certified Network Professional)

Train Yourself for Routeing and Switching

Training provided at nearby locations.
Certified Trainers to teach the delegates.
High Perks after Certification

This CCNP training is meant for those professionals who have one year of experience in the networking field and is one of many CISCO training. These professionals plan, implement, verify and troubleshoot LAN’s and WAN’s while working in conjunction with other network specialists such as those who work on the security system, wireless, voice and video solutions. The knowledge obtained from this certification provides a lasting foundation that is relevant in the physical as well as the virtualized networks of today and the coming times.

Who should take this course

Network professionals including network engineers.
Network operations centre (NOC) technical support staffs.
Help desk specialists.
Any individual involved in implementation and verification of routeing protocols in enterprise networks.

Prerequisites

Delegates must be experienced in the audit of operation path and switching technologies and implementation experience as required by the Cisco Network Devices Part 1 Version 2.0 (ICND1) and Cisco Network Devices Part 2 Version 2.0 (ICND2) courses.Any delegates having an equal skill can also sit for this course.

What Will You Learn

On completing the course, the candidates will have gained familiarity with the following concepts:

Plan and document the configuration and verification of routeing conventions in enterprise networks
Identify, analyse, and match OSPF multiarea routeing functions and benefits
Deploy and verify a Layer 3 solution using BGP to connect an enterprise network to a service provider
Implement and verify a redistribution solution in a multiprotocol network using Cisco IOS Software features
Identify the technologies, modules, and metrics of EIGRP
Evaluate common network performance issues and determine the implements that are needed to provide Layer 3 path control that uses Cisco IOS Software features to control the path

Key Learning Points

Tutor Support

Courseware

Course Overview

This certification is job-role-focused and utilises lab-based learning. Besides it also allows the candidates to maximise their investment in education and increase the value of their enterprise network.The training tests the routeing,switching and troubleshooting knowledge and skills of the candidates.

Course Content

Routing:

Network Principles

Identify Cisco Express Forwarding concepts
Explain general network challenges
Describe IP operations
Describe TCP operations
Describe UDP operations
Recognise proposed changes to the networkLayer 2 Technologies
Configure and verify PPP
Explain Frame Relay

Layer 3 Technologies

Identify, set, and test IPv4 addressing and subnetting
Describe ROUTE maps
Configure and test loop prevention mechanisms
Configure and verify RIPv2
Describe RIPng
Define IPv6 addressing and subnetting
Configure and verify static routeing
Configure and test default routeing
Evaluate routeing protocol types
Establish administrative distance
Troubleshoot passive interfaces
Configure and verify VRF Lite
Configure and test filtering with any protocol
Configure and verify redistribution between any routeing
Describe EIGRP packet types
rules or path sources
Configure and check manual and auto-summarization with any path protocol
Configure and test policy-based routeing
Identify suboptimal routeing
Configure and verify EIGRP neighbour relationship and authentication
Configure and verify EIGRP for IPv6
Define OSPF packet types
Configure and verify OSPF neighbour relationship and authentication
Configure and verify EIGRP stubs
Configure and verify EIGRP load balancing
Describe and optimise EIGRP metrics
Configure and test network types, area types, and router types
Configure and verify OSPF path preference
Configure and verify OSPF operations
Configure and verify OSPF for IPv6
Describe, configure, and verify BGP peer relationships and authentication
Configure and test e-BGP (IPv4 and IPv6 address families)
Explain BGP attributes and best-path selection

VPN Technologies

Configure and test GRE
Describe DMVPN (single hub)
Describe Easy Virtual Networking (EVN)

Infrastructure Services

Configure and check device management
Configure and test SNMP
Configure and verify IP SLA
Configure and test tracking objects
Configure and test Cisco Net Flow
Configure and test logging
Configure and test Network Time Protocol (NTP)
Configure and test IPv4 and IPv6 DHCP
Configure and test IPv4 Network Address Translation (NAT)
Describe IPv6 NAT
Define SLA architecture

Infrastructure Security

Explain IOS AAA using local database
Identify device security using IOS AAA with TACACS+ and RADIUS
Configure and verify device access control
Configure and test router security features

SWITCHING (300-115)

Layer 2 Technologies

Configure and test switch administration
Configure and verify Layer 2 protocols
Configure and verify VLANs
Configure and verify trunking
Configure and test Ether Channels
Configure and verify spanning tree
Configure and check other LAN switching technologies
Describe chassis virtualization and aggregation technologies

Arrangement Security

Define method security using Cisco IOS AAA with TACACS+ and RADIUS
Design and test switch security types

Support Services

Configure and test first-hop redundancy protocols

TROUBLESHOOTING (300-135)

Network Principles

Use Cisco IOS troubleshooting tools
Apply troubleshooting methodologies

Layer Technologies

Troubleshoot switch administration
Troubleshoot Layer 2 protocols
Troubleshoot VLANs
Troubleshoot trunking
Troubleshoot Ether Channels
Troubleshoot spanning tree
Troubleshoot other LAN switching technologies
Troubleshoot chassis virtualization and aggregation technologies
Troubleshoot filtering with any protocol
Troubleshoot between any routing protocols or path sources
Troubleshoot manual and auto-summarization with any track protocol
Troubleshoot policy-based routing
Troubleshoot IPv4 addressing and subnetting
Troubleshoot IPv6 addressing and subnetting
Troubleshoot EIGRP stubs
Troubleshoot EIGRP load balancing
Troubleshoot EIGRP metrics
Troubleshoot EIGRP for IPv6
Troubleshoot OSPF neighbour relationship and authentication
Troubleshoot network kinds, area types, and router types
Troubleshoot OSPF path preference
Troubleshoot OSPF operations
Troubleshoot static routing
Troubleshoot default routing
Troubleshoot administrative distance
Troubleshoot passive borders
Troubleshoot VRF Lite
Troubleshoot suboptimal routing
Troubleshoot loop prevention mechanisms
Troubleshoot RIPv2
Troubleshoot EIGRP neighbour relationship and authentication
Troubleshoot loop-free path selection
Troubleshoot EIGPR operations

About Bedford

With a population of 80,000 Bedford is a county town in Bedfordshire, England. The Offa of Mercia is said to be buried at Bedford. Built by Henry I , the Bedford Castle saw its destruction in 1224. Bedford has been represented in Parliament since 1265. A significant part of the population of Bedford is Italian.

Bedford is named after a Saxon chief Beda, and a ford crossing the River Great Ouse. The subburb was known for its market since early Middle Ages.

John Bunyan, wrote The Pilgrims Progress while in Bedford Gaol. During this time brewing became a major industry in the town. Bedford became an engineering hub by the 19th century. Railways reached Bedford in 1846.

Transport

Bedford is linked to the town and other parts of England either by Bus or by Rail. The A6 road provides road access to the city. There and two railway stations and a network of bus services that serve the city’s transport system.

Bedford bus station

The Stagecoach in Bedford and Bedford Borough Council own the bus station at Bedford. It serves the population is located in the city centre on All Hallows .

Religious Places

Christian Churches

The Civic and County Church of St Paul's
The Church of St Peter's
Four churches from the New frontiers network
Polish and Italian Roman Catholic churches
LDS (Mormon) meeting houses
Numerous independent churches

There are many Sikh temples in Bedford with one of them being in Kempston. It also houses temples of Guru Ravidass and Valmiki.

The following communities also meet in Bedford:

Quaker
Jehovah’s Witness
Wiccan

Filmography

During the 1970’s BBC TV aired the series “Some Mothers Do 'Ave 'Em” in and around Bedford.
In the 2005 “Batman Begins” movie some scenes were shot at the Cardington Sheds near Bedford . It’s sequel , 'The Dark Knight', was also partially filmed at the sheds using the fake working name 'Rory's First Kiss'
In the 2006 Comedy Central version of Outsourced, a good natured Bedfordian played a comic role in "I'm From England".

People from Bedford